Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have two routers in a lab connected through an E1 PRI link which works fine, on one router I have PVDM2-16 and on the other router PVDM2-16 & PVDM2-32. I'm pretty much confused about the way Cisco presents the DSP resources on the gateways s...
Hi guys,I have two 2811 routers in the lab and two VIC2-2BRI-NT/TE cards which both routers recognize as VWIC-1MFT-T1?? I tried changing the slots position, replacing cards with one another, removing all of the extra cards on the router, upgrading IO...
Hi all,we have an internal DID range 6XX in our company and we are going out of the CUCM cluster through a H.323 gateway which is a ITSP's gateway (NetCentrex platform I believe). Recently we upgraded to 8.6.2.22900-9 CUCM and since then have trouble...
Hi all!Here's the deal: I just bought 3 2950-24 switches for my CCNP pursuit and found something strange with the LED ports and STP configuration... All 3 switches have only 1 vlan (the default vlan 1), they are connected to each other with trunk por...
Hi guys,
Has anyone been able to configure PI to show some useful NetFlow data?! I have tried everything I can think of (I'm currently very frustrated with PI) and it seems that a lot of graphs that PI has actually show wrong data information (wron...
1. Thanks for clearing that up 2. I don't get it. When I type show voice dsp signaling everything is blank under the *DSP SIGNALING CHANNELS*section:2811_1_MF-Lab#show voice dsp signaling ? | Output modifiers 2811_1_MF-Lab#show voice dsp signaling...
Hi Ayaz,we had a similar problem at our cluster and the problem seems to be due to the CUCM version, we had 8.6.2.20000-2 version and upgraded to 8.6.2.22900-9 and now everything is working fine. I thinks it's a known bug in the prior version, try up...
Thank Chris for the reply! So there is no way for CUCM to do ANI call forward manipulations? I guess the only other way is to put a gateway between our CUCM and the ITSP and do the desired number manipulation through translation patterns?Marko
