About tuelo0001

tuelo0001 · 06-21-2017

Am running HSRP in all the sites Both branches are connecting to the head office as per the scenario I have configured ip sla on the active routers to track reachability of the links. If the link goes down, they will decrement priority by 50 to a...

tuelo0001 · 06-21-2017

Am running HSRP in all the sites Both branches are connecting to the head office as per the scenario I have configured ip sla on the active routers to track reachability of the links. If the link goes down, they will decrement priority by 50 to al...

tuelo0001 · 06-21-2017

The secondary links are UP From branch 1 secondary, i can ping 2.2.2.2 (HO secondary) and 2.2.2.6 (Branch 2 secondary) But still on the secondary routers, i cannot ping LAN devices unless i turn off my active routers and the standby/secondary routers...

tuelo0001 · 06-21-2017

Branch1-Secondary#sh ip route 192.168.1.0 255.255.255.0Routing entry for 192.168.1.0/24 Known via "static", distance 1, metric 0 Routing Descriptor Blocks: * 2.2.2.2 Route metric is 0, traffic share count is 1 The standby links were put in p...

tuelo0001 · 06-21-2017

Branch1-primary#ping 192.168.3.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.3.1, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 msBranch1-primary#sh ip route 192.168.3.0 255.255...

tuelo0001 · 06-21-2017

i can only get to (Branch 1) 192.168.2.0/24 network from (Branch 2) only if i make the current standby router Active

tuelo0001 · 06-21-2017

Member Since	‎08-01-2016 08:23 AM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	8

User Statistics

User Activity

HSRP

HSRP

The secondary links are UP

Branch1-Secondary#sh ip route

Branch1-primary#ping 192.168

i can only get to (Branch 1)

branches_scenario2.png