Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I’ve recently deployed a wireless lab using a vWLC 9800-CL, and I need some help troubleshooting Internet access for wireless clients.Here’s a quick summary of my setup:WLC 9800-CL connected via trunk port to a Cisco 3750 L3 switch.VLANs:...
Hi everyone,I'm currently working on a practical WiFi lab. The goal is to broadcast SSIDs mapped to two different VLANs: VLAN 20 and VLAN 30. I'm using the Cisco 9800-CL Wireless LAN Controller (WLC) deployed as a VM on VMware Workstation running on ...
Hi everyone,I'm currently troubleshooting an issue where my Cisco AP1852I is failing to join the WLC. The AP is booting up normally, firmware is verified and loaded, radios initialize correctly, and it obtains a valid IP address via DHCP (e.g., 192.1...
Hi Community,I’m working on a deployment where the WLC (Wireless LAN Controller) is configured to provide internal DHCP for wireless clients connecting to specific SSIDs. The clients are successfully associating with the SSID and receiving IP addre...
Hi Community,I’m currently working on a network design where I want the Layer 3 Switch (Cisco) to handle DHCP for both wired (LAN) clients and wireless clients (via Access Point). Please see the attached topology diagram for reference. Network Topol...
Hi Scott Fella,First of all thank you for your advice. I got a success with AP and WLC together on VLAN 1. It worked, the AP can join to the wlc if it has the same subnet. But i want to do it with more advance by separate management (VLAN 1) and CAPW...
No because i'm a newbie do not have enough exp to knew that. Can y show me how to do that? And what the problem of ap when it coulnd't join to WLC. When i plush console cable in AP it showed that:Booting from part2Read 1024 bytes from volume part2 to...
