Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 827 establishing a VPN connection to a PIX501 at a remote site.I want to be able to set up a redundant link from the site with the 827 (SITE A)to the site with the PIX 501 (SITE B).I have two modem routers, one for each site, which I intend ...
I want to be abled to connect 5x 827 DSL Routers to a single 506E. Why you ask! I have a central Site that will become a Terminal Server Farm and multiple remote sites that will vpn in via their own 501's to the 506E. Each of the 5 routers will have ...
I have an 827 that establishes a vpn tunnel with a pix506e. I want to be able to set up a floating static route on the 827 incase the adsl link goes down I can route it through alternate means. I have a router on the inside of the 506e that needs to...
I am having trouble setting up an 801 to dial my ISP using multilink and NAT. The router will dial both channels however it doesn't appear to let any traffic to pass through. I suspect that the problem lies with my NAT configuration. Can someone ple...
Thanks for the info however I'm not sure if I explained myself fully.At the central site I will have a PIX 506E.The remote sites will have PIX 501's.The 506E will be connected to the lan interfaces of 5 Cisco 827 DSL routers. So the central site has ...
