Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 8 Catalyst6509, and I want monitor when the topology change (STP). I have 10 VLANs. Can you tell me which is the MIB and where can I find it? How Do I configure it?Last time one fiber module failed but no logging any menssages in buffer. the ...
I have PIX520 (flash 16Mb and 128 RAM). I have upgradeted from 5.1.3 to 6.3.(3). at fist the configuration was with conduit and outbount commands, later I have changed for access-list. The PIX has 4 interfaces, Outside, DMZ, SEGURA and INSIDE. I have...
Hi;I have a vpn box cisco 3015. the client has cisco vpn client v3.5. Every aplications are working very well. But, I have one problem with MSN messenger, doen't establish the connection with the server. Have Anyone had this problem?.Thanks Sergio Un...
I already have migrated my Supervisor1A, from CATOS v5.3(1) to IOS 12.1(8b)E15. I have the following questions:1.After to upgrade the first SP, the running configuration shows these 3 commans lines: !boot system flash slot0:c6sup11-dsv-mz.121-8b.E15 ...
Hi;First, Ia don't see ACL inside_outbound_nat0_acl defined.If you want that internal users allow to access dmz, I don't necesary static (inside,dmz) zzz.zzz.zzz.zzz yyy.yyy.yyy.yyy netmask 255.255.255.255 0 0This URL can help you.http://www.cisco.c...
I have the following doubt:especifically sometimes the DNS server wants to communicate with External DNS server and Interna (inside) DNS. In this case How Would it work the ACl in the DMZ?Thans for your [email protected]
Thanks Scott for your response.Can I DOWNGRADE from 6.3.(3) to 6.1.(5)?What is the procedure to Downgrade?Because, 6.1.(5)GD is most stable, that is true?Sergio
Thanks Scott;1. How do you see the pix configuration? is it good?2 I have a PIX520, What IOS version do you recommend?3. If I would decide to DOWNgrade the version Where Can I find the documentation?Sergio
