Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I hv configued AP 1310 in Root bridge with client mode. BVI interface has been configured with static ip and the default gateway has been configuredWireless client successfully get's the ip address from DHCP server on network through bridge but not ...
We hv installed aironet 1310 in AP as well as root and non root bridge combination with IOS 12.4(3g)JA1. config works fine for the normal operation like getting client connected to ap, getting IP from DHCP server on the network. The problem is with t...
I hv attached a rough network dia to understand any alternate way to configured EIGRP with Transparent lan service ( TLS ).We hv core location as mentioned as R1 & other remote location R3,R4,R5,56 with their repective network( ip's mentioned in dia)...
I would like to know as how VSS with fabric enable card differenciate with SUP 720 with fabic enable card ?2) What are major advantage of using VSS with fabric enable card to VSS with non fabric enable line cards ?3) How the server load balancing wit...
Core consist of 6509 where all the access vlans has been configured. Access vlan ips - 10.0.0.0 range. server vlan 172.21.0.0 as mentioned in dia. Backbone router consist of 7200 series router where all the branch office at terminated through FR link...
Thanks a lot.One more thing I wanted to reconfirm on that is ... If I get 1G connection at core and want to hook all the Remote office location(10Mbsp) to layer2 instead of layer3 what would be the impact of broadcast counters on the core and remote...
Thanks a lot for your reply.looking to above config I had few more configuration doubts.Attached is the network dia with 2 type of config.1) will both the config works and will be able to ping 192.168.10.0 network from the spoke site(vlan 806).2) In ...
Thanks Robert,curious on that ,How I can configure the perferct method to configure server load balancing with teaming NIC on the system side and also Network load balancing on the Network side. so i don't only hv the SLB but also NLB with high high ...
