Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email addr...
Hi,We have intigrated CUE with CUCM in a test lab but facing an issue in voice view. Configured the JTAPI username and password. But Voice view express has a problem when working with remote CUCM.The IP Phone displays the following error:"Authenticat...
Dear All,We are using ASA 5510 Version 7.2(4) at our organisation. The requirement is we need to give an access to a user with limited access so that he can run only specific commands on configuration mode. We don't have Cisco TACACS server instead o...
Guys we have Headoffice ASA connected to Branch ASA via site to site VPN tunnel. The headoffice ASA has priority 11,20 and 40 configured, while the branch has only IKE priority 50 defined and no default priority is visible under show run. Based on th...
We have a radius server which does authentication for ASA. So considering this, will the following commands accomplish our requirement.----------------------------aaa-server XXX protocol radiusaaa authentication telnet console XXX LOCALaaa authentica...
Thanx Ajay.....however i want to create a new user who can run only one specific command in the configuration mode. Is there a way to create a new priviledge level and assign only one command. If you can provide the commands it'll be quite helpful as...
No its not EasyVPN. Its a site to site VPN tunnel. Could you explain what does the reason "Administrator Reset" mean? and why is my tunnel going down. The IPSEC configuration is identical on the other end.Regards
