Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My ISP gives me 5 public IP addresses that are advertised through a router they provided. The router is plugged into a PIX506E firewall. Is there a way to configure more than one public IP on the firewalls "outside" interface? Thank you!J.
Hi, I have an ASA 5505 (SEC Plus) and I'm trying to configure it so it can be accessed from two subnets running in the same switch. Let's call the subnets:192.168.1.0/24 and 192.168.2.0/24I configured a VLAN for 192.168.1.0/24 on one ethernet port a...
When I look at the specifications of an ASA5505 at the following link, it lists a bunch of features that I wasn't aware of:http://www.buy.com/prod/cisco-asa-5505-10-user-bundle-8-x-10-100base-tx-lan-1-x-management-3-x/q/loc/101/204229215.htmlHere's t...
I have an ASA 5505 with two internal VLANs - let's say 192.168.0.0/24 & 192.168.1.0/2 and an outside interface which is the internet gateway for both of the internal subnets. I can get on the net from each internal net but I can't figure out how to ...
Hi,I have a multi-homed network (5 subnets). Can I use an ASA-5505 to protect them? I know it has 8 FE ports but can all of them be configured with different security levels?Thanks!J.
Regarding your comment about not having luck raising the score with the Qualys checker, that's expected. The change you've made to the group policy does not affect the web server's configuration and that's the only piece the Qualys checker tests.
Thank you, Jon!!!I found this post while awaiting a reply (I know, I should have looked harder before posting):http://www.experts-exchange.com/Security/Software_Firewalls/Enterprise_Firewalls/Cisco_PIX_Firewall/Q_24540244.htmlIt says the same thing. ...
