Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I face problem when configure both Local Switching & AToM on 1 Physical ATM Interface.the PVC on both Local Switching & AToM sharing the same VPI.seems like each and every PVC that i created with the same VPI being local switch and never get to tr...
R1---T0----R2 ---T1----R1 have 2 public Interface.R2 has 1 Public Interface.DMVPN being setup between the two router2 Tunnel being configure for the DMVPN.IPSEC connection from R2 to R1 via Tunnel0 are stable and stay connect.IPSEC connection from R...
I think there are some misunderstanding. let me clarify my setup:Equip1(pvc1/200)---PE1(Eth)---MPLS---(Eth)PE2---(pvc2/200)Equip2I have 2 equipments, both need to communicate in ATM.VPI1 from Equip1 need to switch to VPI2 in Equip2 and vice versa
let say i have the following setup, pls verify if my configuration is correct..pvc2/200---PE1======PE2----pvc1/200PE1:interface atm0/0atm pvp 2 l2transportxconnect 10.0.0.2 123 encapsulation mplsPE2:interface atm0/0atm pvp 1 l2transportxconnect 10.0....
