Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am intending to manually reset the LWAPP (1131), however, is there a way to access the LWAPP CLI? Currently, the LWAPP is stuck in a loop, thus debug message on the LAP display " No Join Response from WLC". So, because of this recurring loop, the...
The message notification icon envelope, which is displayed next to the line extension # of the IP Phone, is indicating there's a message in the inbox. However, when attempting to retrieve the message, the Unity system response tells me there are NO n...
Does the WCS v5x have the ability to detect Rouge APs? Also, if yes, does the WCS have the ability to generate Rogue Reports? We're looking to fully deploy WCS within our Autonomous AP fabric. However, the information we seek, will play a critical r...
We use CME. When users attempt to place an outbound call, they only have approximetly four seconds to complete the 10 digit dailing. Beyound four seconds, a busy signal is generated, thus, unable to place the call.We obviously need to make an adjustm...
Yes, that is correct....I wanted to envoke "config term" and was not able to do so.Perhaps because the type of image on the AP, which you say is the LWAP RCV image. All I simply wanted to do, in an attempt to fix the discovery issue between the AP an...
Please clarify your recommendation my good friend. We have a AIR-LAP1131AG-AK9, hence, a LWAPP. According to documentation, these LWAPPs can be manually configurabled right out of the box. The docs provide the commands for a proceedure in the event ...
Good tips Brad! Now that you mention this, it could be that 1 of the 15 persons that are sharing this line, is accidently dialing our designated 4-digit number and turning ON the Message Icon ( this assumes they must have selected the shared line to ...
No, the WCS cannot detect a rouge AP coming from an Autonomous AP. My understanding is that the WLC is the device that detects the rouge APs and sends that information to the WCS. Also, with WCS and LAPs, the WCS can launch via LAPs, a DOS attack to ...
