Hi,
I've been having major issues getting WCCP and the Zone Based Firewall working together on an ISR4331. To rule out the Zone Based Firewall, I've removed all of its configuration. I still can't get WCCP to work!
Clients are on 10.10.0.0/16, t...
My recently acquired SRW224G4P is now in production and seemingly working well, despite my battle with the awfully designed, awfully slow and buggy WebView!The problem started on Sunday morning - I noticed that there was activity on the ports every ...
I am trying to configure a port so that all traffic must be 802.1Q tagged and any untagged traffic is dropped (to replicate the setup of my ancient switch that this one is replacing).Under VLAN Management | Port Settings, if I select Mode = General a...
Hi Rick,
I'm rather puzzled too! I have the 4331 back in place, no ZBF whatsoever but still no packets being redirected to the Sophos appliance (the good news is that there's still no 'bad rcv_id' messages being logged):
#sh ip wccp web-cache
Gl...
Hi Rick,
Yes, I definitely removed the ZBF from my configuration as I feared that it was preventing things from working. Sadly it didn't improve matters. I will give it a try now that the 'bad rcv_id' errors are no longer present and will report...
Hi Georg,
Many thanks for the reply. I'm trying to get WCCP GRE to work with the ZBF as I'd read that L2 wouldn't work (unfortunately we had to use L2 for our proof of concept as all I had available was a 2821 that doesn't support GRE). The 2921 ...
Hi Rick,
I wish you saw something, too! :-) I'm currently trying to get this raised as a support call as we should have software support on the 4331 (definitely not on the 2921 as it was in the scrap/spares pile)!
If/when I get a solution I'll p...
I've made a little progress by reconfiguring everything related to WCCP on both the router and Sophos Appliance. I'm no longer seeing any 'bad rcv_id' messages so things are looking a little better. However, it's still not working! This is current...
