Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is different bettwen these two chassis? WS-C6509-NEB and WS-C6509I'm thinking abou this two bundles WS-C6509-2500AC= and WS-C6509NEB-1300A=, do i have to get fan separately?thanks
Hi all,I’m a newbie to 6509 and planning to get this bundle model WS-6509-EXL-FWM-K9, the link is from this site:- https://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps4452/prod_bulletin0900aecd80630aa1_ps2706_Products_Bulletin.htmlHere my ...
I'm using ASA5520 and the current s/w and asdm version is asa802-k8.bin and asdm-602.bin.Planning to upgrade to asa821-k8.bin and asdm-621.bin, do I have to update in sequence? or should be okay to update to the latest release?Thanks
All,Which client software is support or compatible with the VPN concentrator on 6509E (Catalyst 6500 Series IPSEC VPN Shared Port Adapter)I'm planning to get this line card and preparing for client software side, I have tested the cisco VPN Client so...
been trying to make an autoinitiation from the client side to auto reconnect to ASA's VPN concentrator. I put these lines into vpnclent.ini and accroding to the document this should work when connection drop but the software seem not even try to reco...
Hi GiuslarThanks for the info,I'm on the table 3 as suggested and can see the bundle model, however it also shown "Software Release" version, do i have to purchase this software or there are only information.I also looking for alternative a cassis fo...
Hi Jon,thanks for the info, what do you means by single or multiple contex?I would like to have a virtual firewall and ACL on very tier (Tiered Access Control) method, 15 VFWs are required.Therefore, I would need to purchase an extra license which I ...
my bad,I have updated both sw and asdm and now I cannot connect to the ASDM anymore, any suggestion?From:-asa802-k8.binasdm-602.binTo:-asa821-k8.binasdm-621.binI'm still able to access via telnet thoughThanks