Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Tring to add a new static nat rules, but it seems that i an not able to do that10.10.10.10 Public IP 20.20.20.20 inside LAN IPtrying to add:fw(config)# static (inside,outside) tcp 10.10.10.10 https 20.20.20.20 https netmask 255.255.255.255ERROR: map...
Hi guysI need help from some of you to migrate a following VPN (site-to-site) config from ASA 8.2 to ASA v8.3ASA 8.2interface Vlan x nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0!global (outside) 176 172.28.176.10nat (inside)...
Hi guysi got an error during configuration of vPC between thow Nk5548UP swithes.Please find attached configuration og both switches.I cant see any missmatch in configuraiton I also see following error under vPC status: Type-2 consistency reason ...
Hi guysI am trying to “build up” a small home-network and using some of following Cisco equipment’sASA 5505 v8.4.3 witch base licenseCisco Catalyst 3750G with ipservices version 15.0.xand 1 qty of AP1142NI am not able to get internet access from any ...
I want to be sure if this is an working configuration:"local site"Int vlan x description ** inside ** ip address 192.168.2.0/24!object network inside-local-network subnet 192.168.2.0 255.255.255.0!object network inside-sslvpn-network subnet 192.168.5...
Jenniffer, your solution works fine - thanks for your help!I have similar question regarding ASA 8.3 codeI am trying to understand following code in v8.3ASA 8.2access-list nat extended permit ip host 10.0.2.2 anyaccess-list nat extended permit ip hos...
Grant i do understand differences between vPC and VTP . My question is why i was not able to run VTP Transparent mode on switch-02 when the switch-01 were placed in VTP Server mode ..?So evry time I want to add one new VLAN ID on switch-01, that new ...
Ivan, what is the reason why my configuration cannot be like mentioned in attached files in my first post?I am using two Nk5 switches and they are connected together like u can see from configuration files, by using 2x10 Gig interfaces and they are i...
