About christopher.baldwin

christopher.baldwin · 09-02-2012

First off, please forgive me as I'm very new to Cisco products, and came into some information that might lead me to believe the VG200 product will do what I need.I have a private microwave IP-based network and the need to transport bi-directional au...

christopher.baldwin · 09-03-2012

I understand the deficits of using the VG200 from a support standpoint, but it will do what I want it to do, correct? I'd rather prove the concept on dirt cheap hardware than newer, expensive hardware to find out it won't work anyway.

christopher.baldwin · 09-03-2012

So, Paolo, while it is legacy hardware that is more or less unsupported, any VG200 with the VIC-2E&M cards in it *WILL* do the job, correct?This is more or less a proof of concept project at this point, so budget is an issue.

christopher.baldwin · 09-03-2012

Robert,Thanks for the reply. The E&M card is the most suited interface to the radio equipment, in fact Cisco recommends it in their LMR (land mobile radio) interfacing documents for the 2600 series.I've just noticed that the 2600 series requires very...

christopher.baldwin · 09-03-2012

So it is FXS/FXO on VG200 only? No E&M? There is mention in the Cisco documentation about using E&M cards on VG200.http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094ab9.shtml#platThis mentions all releases of VG200 suppor...

Member Since	‎09-02-2012 05:20 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

Questions about using two VG200 gateways back-to-back

Re: Questions about using two VG200 gateways back-to-back

Questions about using two VG200 gateways back-to-back

Questions about using two VG200 gateways back-to-back

Questions about using two VG200 gateways back-to-back