Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have MPLS backbone and we are connecting to another MPLS SP using Back to Back VRF in two sites, running BGP. We are advertising the same subnets to the SP from the two sites. Now we want to control the return traffic from the SP back to our MPLS ...
I'm configuring eBGP multihop between two Cisco routers, between the two routers there is a L3 Switch. proxy is connected to the L3 switch and we are using WCCP to intercept the traffic between the two routers.
On the L3 switch, I'll configure two s...
I have a basic design question. We have few remote sites connected to the two cores, the two cores (6500) at two different sites are running OSPF between them and to the remote sites. The two 6500 are running eBGP to another partner, and iBGP betwee...
The two peers are directly connected to the L3 switch and no route is required to bring the BGP up.
The Proxy is connected to the L3 switch, and we are forwarding all the traffic to the Proxy (not only web). Only traffic sourced and destined to/fro...
Thank you so much. I still have some confusion,
Now let's assume that I changed the Local pref to 120 on the eBGP routes recived by 6500-2,
Now 6500-1 has the same routes coming from eBGP, iBGP (with LP=120) and OSPF, which route will it choose und...
