Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We cannot connect from our different logical VLANs but can connect to inside and DMZ zone. Users on my different logical VLANs the (PSN) network cannot reach any of the other PSN network. inside and DMZ is ok they can reach them.
This is already in...
Hello,
I have implemented ASA 5516-x with inside, dmz, outside network.
Inside can connect to dmz (both local hostname and public IP/hostname)
outisde can connect to dmz (public IP/hostname)
Any dmz server tries to connect to the Public Server (Pub...
Hi All,
Our new network is going to be like this after implementation.
Internet (Public IP /24) .1 <-> .2 ASA <-switch-Internal
|----<-switch-DMZ
|----<-switch-TechDepartment
ASA 5516-x
All switches are Catalyst 2960's
All of these switches...
Hey Guys,
I need some guidance on how to do this properly. Maybe i'm not seeing things on the bigger picture right now or i'm doing something wrong with getting the Public /24's
We have the following; We are a Cisco Shop; We cannot get consultants fo...
Hello,We migrated from a pix 515R using a outside and inside interfaces. The old pix has a static ip for the inside interface so we use all the class c ip's on the inside.We are now migrating to a ASA 5520 but now with the following interfaces. outsi...
The ASA connects to a Cisco switch which I have setup the trunking for the connection to the ASA-Switch. The rest is configured as per VLAN access port. I'm sure its configured right unless one of my admins put the wrong cable on the wrong port. I kn...
Highly unlikely I can ping 172.21.1.215 on the ASA VPN and from inside/dmz network just fine.
Windows 7 firewall is completely off on 172.21.2.24
packet-tracer input PSN-3 tcp 172.21.2.24 12345 0 172.21.1.251 80 detail
-- This will not accept the...
That is very weird, I cant seem to get any ping reply from the server from my windows VM inside 172.21.2.24
I also checked all the ports the switch/servers are connected too they are on the right ports in the switch with proper access and trunk and...