Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Together,I installed CML 2.9 and most of the images are running out of the box well, but Firefox and Chrome would not work. Error is "failed and validate image". I see in the CLI everything is there and it is correct installed. When I delete al...
Hello,I have the following Issue. We should build a S2S Tunnel to a customer with overlapping addresses. On the customers Site we have two Server with 10.1.20.2 and 10.1.20.3 on on our site we have to server 10.1.80.10 and 172.16.5.7. The mapping net...
Hello Together,I configured on Cisco FMC 7.6 the DHCP Server for one Sub-Interface because we have to route this VLAN on the Firewall. I add the VLAN tag and configured the switch also for this Vlan. Problem is I cannot get a lease. I saw on Cisco IS...
Hi Singhaam, I will test this. At the moment I will divide on the Firewall. But the FW does not have much Power the Inteface. Development works with hugh Files and the complain it is to slow
The IP´s are on remote site. They are the NAT ed IP (10.150.1.65 and 66) and they are routed through the tunnel (the net is routed 10.150.1.65/29 not the single IP´s). Yes they are in the ACL but I am not sure about the proxy-ACL. Is it different?
Many Thanks, Tunnel comes up. One Question please. The Admin from the other company gave me two IP-Addresses which should be able to ping. I can initiate the Tunnel, see packets go inside, but nothing comes back. So I am not able to ping the addresse...