About joseph.bucar

joseph.bucar · 11-20-2015

Hello and hopefully someone here can help as I am not an expert in Cisco. I am having an issue with traffic thru a site to site tunnel. It appears that not all traffic is being allowed into the ASA 5505 from the ASA 5510. Configuration: HQ = ASA ...

joseph.bucar · 05-05-2015

Hello:I was wondering if anyone can give me any insight on how to setup a S2S tunnel between a ASA5510 and a Netgear VFS338 that has a Dynamic WAN IP.I need to access the main production network (172.16.4.0/24) and a DMZ (192.168.50.0/32) at the loca...

joseph.bucar · 11-23-2015

Here is a trace from the 5510 going to the remote site ... I have also attached a screen shot of the ASDM Firewall Rules Config on the 5505 as well. Thanks, Joe

joseph.bucar · 11-23-2015

Also attached is an ingress trace when making a connection from the 5510 side to the 5505 using Teamviewer. Thanks, Joe

joseph.bucar · 11-23-2015

I have attached what I am seeing on the 5505 (Remote Office) site when starting a session from HQ for TeamViewer. I see the connection hit the 5505 and then it tears it down. I dont see any deny, etc. I am at a loss here. Its obvious the traf...

joseph.bucar · 11-22-2015

Vibhor I would post the 5510's config but I need to heavily sanitize it first. There is alot of public information in it that Id prefer not to make openly available. I will do that and post it or is there a way I can get you a private copy of it? ...

joseph.bucar · 05-06-2015

Hello:I am running ASDM version 6.4(5)106 -- ASA Version 8.2(5)Thanks,Joe

Member Since	‎02-24-2015 10:55 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	7

User Statistics

User Activity

IPSec Tunnel between ASA 5510 and ASA 5505

Site to Site IPSEC Tunnel Between ASA 5510 and Dynamic IP Netgear FVS338

Here is a trace from the 5510

Also attached is an ingress

I have attached what I am

Vibhor

Hello:I am running ASDM