05-05-2015 11:20 AM - edited 02-21-2020 08:13 PM
Hello:
I was wondering if anyone can give me any insight on how to setup a S2S tunnel between a ASA5510 and a Netgear VFS338 that has a Dynamic WAN IP.
I need to access the main production network (172.16.4.0/24) and a DMZ (192.168.50.0/32) at the location of the ASA. I am not sure how to set this up thru
ASDM or the CLI.
Thanks for any help you can give,
Joe
05-06-2015 12:28 PM
What is your ASA5510 version running ?
You use FQDN as your vpn-peer address, I assume your internal dsn server is at: 10.10.10.10 and let says FQDN is VFS338.no-ip.org
dns domain-lookup inside
DNS server-group DefaultDNS
name-server 10.10.10.10
domain-name yourdomain.com
object network obg-VFS338
fqdn VFS338.no-ip.org
Now you use your vpn-peer is: VFS338.no-ip.org
I hope that answers your question.
05-06-2015 01:05 PM
Hello:
I am running ASDM version 6.4(5)106 -- ASA Version 8.2(5)
Thanks,
Joe
05-06-2015 07:23 PM
You must upgrade your ASA's image, it is old not supported.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: