Site to Site IPSEC Tunnel Between ASA 5510 and Dynamic IP Netgear FVS338

[joseph.bucar]

Hello:

I was wondering if anyone can give me any insight on how to setup a S2S tunnel between a ASA5510 and a Netgear VFS338 that has a Dynamic WAN IP.

I need to access the main production network (172.16.4.0/24) and a DMZ (192.168.50.0/32) at the location of the ASA.   I am not sure how to set this up thru

ASDM or the CLI.

Thanks for any help you can give,

Joe

[rizwanr74]

What is your ASA5510 version running ?

You use FQDN as your vpn-peer address, I assume your internal dsn server is at: 10.10.10.10 and let says FQDN is VFS338.no-ip.org

dns domain-lookup inside
DNS server-group DefaultDNS
  name-server 10.10.10.10
  domain-name yourdomain.com

object network obg-VFS338
 fqdn VFS338.no-ip.org

Now you use your vpn-peer is: VFS338.no-ip.org

I hope that answers your question.

[joseph.bucar]

Hello:

I am running ASDM version 6.4(5)106  -- ASA Version 8.2(5)

Thanks,

Joe

[rizwanr74]

You must upgrade your ASA's image, it is old not supported.