Hi, I have an ASA 5540 in main office and a remote office recently opened up, has come up with a broadband firewall which supports IPSec. but only with a single subnet.Meaning in ipsec configuration the other end device shows capacity to add sin...
Hi, I have two 5508 WLCs which where running 7.0.x and to test out features on ISE, I upgraded that to 7.3.x, Since then I am facing issue on concurrent users.I have mulitple ssids having dot1x and webauth security. WebAuth is taking local ...
Hi guys, I have an issue with hub and spoke vpn connectivity.My connection is like the following ------ ISP1 (Static IP) ----SPOKE (Branch)-| |---------------- INTERNET ---------...
Hello group, I am facing a strange problem with my ISE deployment.In test environment I have used ISE from version 1.0 to the latest. Currenty what I have is 1.1.1 wit latest patch.I have configured dot1x and central web authentication...
Hi, We were running on ASA 5540, 8.2(1) in active/standby mode.Now we have upgraded standby box to 8.4(3) and it is active now.There are few L2L, one EazyVPN, anyconnect and Remote IPsec configured in the ASA from previously. After the upgrade...
Very true, I just gave the normal command sets for the HUB :-)My actual configuration is as followingcrypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set my-set esp-3des esp-md5-hmac crypto ips...
I got the problem Analyzed now. Cisco TAC has confirmed it as bug It was first found in 8.4(1).10 and the bug id is CSCtq32213 VPN ports not removed from pat port pool when crypto map is applied.The issue is that if you have a client which uses o...
One more interesting point to this thread.The issue happens only when the secondary becomes active.I have switched my primary to be active and no one has reported the issue for the past few days.i had upgraded the secondary/standby unit first. Since...
Yes, I was in real time migration. That is why one box I (Primary/standby) running on 8.2(1) and the Secondary/Active running on 8.4(3).Many a suggested it might be an issue of the mismatched versions of OS. Because of that I upgraded both the boxes ...