About househunterlives

househunterlives · 07-02-2012

Working on a C4948-10g switch. Trying to reset switch to factory settings. I have ran the Switch#>wr erase, command but the vlan's are still in the config. If you do a show vlan it still shows all the vlan text. I have tried the Switch#>delete vlan.d...

househunterlives · 03-27-2014

Is there a command in which you can shut and no shut the FX0 and FXS modules (reset the cards) without taking down the router (c2911)? Rigth now we use a VG224 with a C2911. If anything goes wrong with the analog lines we can reboot the VG224 without...

househunterlives · 07-03-2012

Some how it deleted its self. I power cycled the unit and check the vlans config and they seem to be all gone. Thanks for your help.

househunterlives · 07-03-2012

This is the error message that comes up Switch#erase cat4000_flash:vlan.dat ^% Invalid input detected at '^' marker.Switch#

househunterlives · 07-03-2012

That didn't work either. I should be able to do this command under Switch#erase cat4000_flash:vlan.datAny other ideas?

househunterlives · 07-03-2012

I did the erase cat4000_flash: it took the command but the vlans are still there. Sent from Cisco Technical Support iPhone App

Member Since	‎07-02-2012 07:39 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

How to Delete vlan config on C4948-10g

Is there a command in which

How to Delete vlan config on C4948-10g

How to Delete vlan config on C4948-10g

How to Delete vlan config on C4948-10g

Re: How to Delete vlan config on C4948-10g