Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have configured an MGCP-integrated FXO port. However, when making an outbound call through the FXO port, the call fails. The following debug logs are generated during the attempt. Could anyone help identify the issue? vgw#vgw#vgw#vgw#*Mar 5 05:32:5...
I have integrated a CUCM with an MGCP gateway using an FXO port and completed all the basic configurations for both inbound and outbound calling. However, when I place a call from an IP phone to a local mobile number, the call shows as connected almo...
crypto ipsec transform-set TSET-1 esp-aes esp-sha-hamc the cmd having typo mistake it should be like this-crypto ipsec transform-set TSET-1 esp-aes esp-sha-hmac
Thanks everyone, after changing the cable between FXO port to PSTN (4 pin to 2 pin), I'm able to make outbound calls. But the inbound calls are reaching gateway, failed to ring the IP phone, checking with that.
I directly connected a landline phone to the PSTN line and verified that it is working correctly. However, when I connect the same line to the FXO port on the gateway and attempt an inbound call, the IP phone does not ring. Additionally, the gateway ...
Thanks @Roger Kallberg , but It is working fine with the landline phone. We informed our telco, and they mentioned that since it works with the landline, everything is correct from their side
