Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have plenty of certs running on my ACE, but when trying to import some Verisign certs, I get the following message:Failed to Deploy config to device: Configure device error: com.cisc.nm.lib.cmdsvc.ssh2.ssh2Exception. Please enable ssh for ACE by ty...
Hi, I'm pretty new to the Cisco ACE 4710. Can anybody recommend a book or two that will cover the ACE configuration and best practices. I have downloaded the config guide and the quick start, and will be going through it, but looking for anything els...
Hi everybody. I installed a brand new ASA to replace my current one, and need a bit of help with the setup of AnyConnect. I believe I have everything setup correctly, except for my NAT exceptions. I can successfully connect to the ASA via the clientl...
Question:We are in the process of migrating our ISP from two Sprint T1s to a 20Mb Fiber based connection. I have a new front end router(2911) that will be in front of the ASA, and I have an empty interface on the ASA. Can I use both connections conc...
I have a new 20Mb internet being put in soon. The new ISP will be putting a 15000 series router in our facility, and will be giving me the Internet in an Ethernet handoff. I have heard from a few different Cisco people about where to terminate, but w...
rahgovin, thank you VERY much for your help in this. Now I just have to work on the clientless portion, but using the AnyConnect client is working perfectly now. Thanks a bunch
Looks like that worked. I added the new subnet, 192.168.5.0 to the core with a route to the new ASA. Then I did the following:no object network obj-192.168.2.0no access-list testcap extended permit ip host 192.168.2.100 host 10.0.7.5no access-list te...
Yeah, it looks like I am seeing the echos request coming across, but not a response:ifnASA5520(config)# sh capture captest4 packets captured 1: 10:20:09.130654 192.168.2.100 > 10.0.7.5: icmp: echo request 2: 10:20:14.582840 192.168.2.100 > 10.0.7...
Not exactly sure how to do a capture. Using the ASDM, I was watching the real time log viewer but didn't even see the traffic coming across. I see the traffic when making the connection, but not when initiating traffic after the connection is made.
