About gblomqvist

gblomqvist · 05-23-2019

Hi!My customers and I have been scratching our heads with this but come to any answer on our own, somehow it feels that we are missing the obvious... Anyhow... the problem is this: They have a vWLC running r8.5.140 and approximately 150 APs (mostly ...

gblomqvist · 07-09-2015

Hello!We are having trouble with an Mesh-installation where we are using CAP2702e in weather-proof enclosures and a WLC5508 running r8.0.115. The APs is connected to multiplexers/filters that divide the signal to 2,4GHz Omni-antennas for the clients ...

gblomqvist · 12-03-2014

Hello!I have received a new WLC2504 for my lab, which is nice.... What's not so nice is that I get a mysterious error message on the console. It appeared when the wizard started at first boot and it apperars at every startup since. I have gone throu...

gblomqvist · 10-28-2014

Hello!A collegue of mine and I discussed the different ways we could deliver a SSID on a customers APs on their geographically different sites ...... The customer have a WLC5508 (r7.6) and (mostly) AP1142.All of the APs are in FlexConnect modeTwo SS...

gblomqvist · 09-15-2014

A customer of mine have previously had 2 AP1242 set up as root-AP and then an additional AP1252 set up as WGB onboard a (very slow) moving vehicle. This has worked very good.On the vehicle there is 1 "real" PC and 3-4 additional PLCs or such "dumb" e...

gblomqvist · 05-23-2019

Grrrr... Copy'n'paste is a ************** sometimes. The correct table is this: Setting vWLC WLC5508Aironet IE No YesClient exclusion timeout 180 6...

gblomqvist · 05-23-2019

As always, something essential slips. Sorry for that. The session timeout is disabled (box not ticked) on both WLCs. And another difference... Under the tab "Security" and "Layer2" on the vWLC Fast transition is enabled. BRGöran

gblomqvist · 08-17-2015

Hi Brett!Aplogies for the late response, vaction times in sweden for first me and also the customer .... :-/CleaAir is enabled and the SNR values are the Average as reported in the link-test. One question for everybody... Mesh and MIMO-antennas? Goo...

gblomqvist · 12-03-2014

Hi all!Sorry for the (very) late response. Thanks for your replies, using a higher index worked. We have tested in lab and applied IRL.BRGöran

gblomqvist · 09-19-2014

Hello!Yes..... That one (WPA/AES) I overlooked when browsing the config file, I was convinced that I had set that up during install but obviously it was changed during customers own first "look-see".... :-(I was on site yesterday afternoon and we cha...

Member Since	‎05-13-2003 10:00 PM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	25

User Statistics

User Activity

Guerst-users on vWLC are disassociated and have to reconnect!

The trouble with mesh.... AP2700 & WLC5508 (r8.0.115)

Error message on brand new WLC2504; "Failed to write...."

SSID on FlexConnect versus Local mode APs???

Slow roaming for WGB-client (mobile) on AP/WLC!

Re: Guerst-users on vWLC are disassociated and have to reconnect!

Re: Guerst-users on vWLC are disassociated and have to reconnect!

Hi Brett!Aplogies for the

Hi all!Sorry for the (very)

Hello!Yes..... That one (WPA