Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I have an interresting question i think.If I have a TE tunnel with Explicit path,And in the middle of the tunnel, there aretwo lines, equally big so they have equallymetric wise to the destination.Will the tunnel be "equal" load-balanced"through t...
Hi everyone,I have a question, how many routescan ospf possibly carry without drainingthe routers down from cpu cycles of processingLSA's?conditions:5-10 routers,single area,all functioning with 7200 NPE-G1..How many OSPF routes could be therebefore ...
Hi,I have been reading and searching for a long time,I have an issue with MPLS-TE, ok, let me explain..We havePE(7600) -> MPLS-network <- PE(7300)We have EoMPLS connection between these pointsover 2x STM-1, and we want to lets say,STM1(tunnel0) take ...
Does "service-policy" command (with class-map/policy-map) have any performance degration considering if I added it on Gigabit Interfaces on 7200? or Faste on 3600?
Hi,The 'vrf VRF-A' after the ip helper-address disappears if its the same VRF as the interface is.But the command syntax is correct. it should be!interface Ethernet1 ip vrf forwarding VRF-A ip address 1.2.3.4 255.255.255.0 ip helper-address 192.1.1.2...
Hi,I recommend you to study first on BGP protocol beforeyou go for the MPLS.If you have basic understanding of BGP, you will manage to go through, but I truly recommend you togo for BGP before MPLS.Hope that helps.K.B.
Hi,I know that Ericsson and Cisco has some solution contract (I dont know the details of that) to each other that say they work with each other, Ericsson with DSLAM and Cisco on Infrastructure. (and we have tested Ericsson with 1GigE interfaces with ...
Many thanks for clarify this for me.But I have one more question about this scenario.When selecting explicit paths,I select the Loopback IPs of the next-hops.Is it possible then to select the IP'sin between them?Our current TE tunnels, when I select ...