Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I need to be able to alert on large bandwidth spikes for specific WAN traffic and also alert when the same ip accesses a internal webserver multiple times within a time frame or exceeds a bandwidth limit.Could anyone tell me if this possible...
Hi All,I have an interesting problem with my current router setup that I wonder if anyone has any suggestions for. I have two data centres both with their own /25 public IP range that peer with my ISP for BGP. For resilience I have a sub interface o...
Hi all, I have an LDAP sync issue where the user accounts in AD have spaces in them i.e. Firstname LastnameWhen I sync all is well although I am unable to add any ldap accounts to groups as User ID's are not allowed to contain spaces.Has anyone had a...
Hi All,Having a slight issue, I have a BRI on a connected MGCP router that I need to have running as an NT.It works fine when I add the command to the router;Interface BRI 0/1/0 isdn protocol-emulate networkThe problem comes when CM overwrites the BR...
Hi, Does anyone have any better ideas but do I really need to create an ephone-dn for each E1 channel on an overlay key if I want a broadcast hunt group on a E1 DDI?
I was wrong here - Looks like still no direct upgrade to V7 from 6.1.3 - http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074
With 7.0(2) it does say you can upgrade from anything above 6.0(1a) so the issue upgrading from 6.1.3 may now be resolved.When you attempt the upgrade which I did via FTP it did say unsupported but that was to 7.0(1). As I had upgraded from 6.1.2 to ...
Point to note, You can not upgrade to V7 currently from 6.3, only 6.2 so if you are planning an upgrade may not be worth it as I had to downgrade prior to upgrade.
ATA is not supported for modems, I always use VIC-4FXS/DID boards.Never tried but VG's should work also "The Cisco VG248 is an analog gateway for the connection of analog phones, fax machines, modems, and analog voice mail systems to a Cisco CallMana...
