About jon.armani

jon.armani · 07-02-2012

I've got two MDS 9124 FiberChannel switches, and can SSH into them using RADIUS authentication with my domain admin user.I'm trying to do things, like update the license file, but lots of "normal" commands, like "copy" which is documented in the lice...

jon.armani · 04-13-2012

We've been trying to recover the admin password on our two MDS 9124 fiber channel switches using this documentation from Cisco: http://goo.gl/xeyZvHas anyone done this successfully? When I hit step 10 to "load bootflash:IMAGE.bin" after changing the...

jon.armani · 10-25-2011

I have a new UC540 with SPA509G phones, all on the latest firmware and configured with CCA 3.1.1. The issue: When connected on a call, the Transfer softkey is missing, so they cannot make transfers. Troubleshooting so far: I see it in the default te...

jon.armani · 10-21-2011

Just set up this UC540 with all SPA509G phones, but when a user tries to transfer a call to another user, the call will play hold music (presumably while the 1st user is initiating transfer), then get a ring or two, then get the voicemail greet messa...

jon.armani · 07-10-2012

SECOND EDIT: It worked! It just took a few minutes to sync with the RADIUS server across the network! EDIT: Some digging around, and I found what you were talking about. I see the existing attribute called Cisco-AV-Pair with value "shell:priv-lvl=1...

jon.armani · 07-09-2012

That looks like the answer . . . My account is authenticated through RADIUS and shows up in Cisco's Device Manager for that switch as "Network Operator" and the "Admin" account it "Network-Admin." Unfortunately, we don't know the password for the Ad...

jon.armani · 10-26-2011

We had done many factory resets during initial config last week, but I will get with one of the users today to walk them through it (I am working remotely this week). Will let you know. Thanks.

jon.armani · 10-24-2011

David,Thanks for the help; I created a brand new template and assigned it to everyone's phone. The new template actually kept the defaults of what I wanted (the default template's settings) so I just created it, checked it had the settings I wanted,...

jon.armani · 10-22-2011

I've heard that once you go CLI you should stick with CLI. If I did as you proposed, would I not be able to use CCA anymore?

Member Since	‎09-20-2011 01:19 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	11

User Statistics

User Activity

MDS 9124 -- Limited Command Set?

Password Recovery for MDS 9124

Transfer Button Missing

Why are my transfers all going to voicemail?

Re: MDS 9124 -- Limited Command Set?

MDS 9124 -- Limited Command Set?

Transfer Button Missing

Re: Why are my transfers all going to voicemail?

Re: Why are my transfers all going to voicemail?