Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
dears ,i want to configure ACS 5.0 to authenticate WLAN user , i did our configuration on the controller .but what is the required configuration on the ACS 5.0 .
i want to authenticate WALN user from the acs 5.0 , and the acs integrated with AD but these users have account on the AD but there some PC.labtop not joined on the domian so can they authenticate without joine the PC or labtop to the domain using t...
hey guys please can you help me on this issue, I have a hub and spoke topology regarding to gre tunnels and the routers are running eigrp across the wan, the question is I want to redirect all the traffic across the tunnels first just let me tell you...
hi all , we have a scenario that a pix is installed in a remote site and has a vpn connection with the HQ (ASA , the vpn is up but the I can't ping the LAN from eithwr both sites , but also I can do remote desktop from both sites ?!! can anyone hel...
thanks for support.how we can upgrade to 5.1 and how we can install the OS .and for the Wlan soulation anyone provide us document explain how we can configure with acs 5.1
first to be clear the HQ has more than one remote site and all are working except the newly configured remote site, on the pix I put the command (fixup protocol icmp error) and still nothing ?! it does not take the commands you mentioned before becau...
