Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I am trying to implement some QoS on my 851w router and it seems my options are somewhat limited.My best option it seems is to enable WFQ on the WAN interface.Question how does the router know how to equally share the bandwidth. The router...
Hello All,I am trying to configure QoS on my Cisco 851w router using the class-map command.However it won't accept the class-map command.The router is running cisco IOS version 12.4(15)T10"C850-advsecurityk9-mz.124-15.T10.bin"Can anyone help?Thanks.G...
Hello All,I have an ASA 5505 firewall that I want to use to share an office internet connection fairly.I need to create VLANs for office1 and office2. office1 and office2 are separate companies within the building so they should not be able to comm...
Hello All,I am installing an internet connection into a shared office suite and need to fairly allocate internet bandwidth accordingly.Say its a 1Mbit line, I would like either network to be able to burst to the maximum bandwidth when available but s...
Hello,I have just powered up a brand new 851 router and proceeded to configure it using the SDM Wizard as explained in the enclosed guide.However I get as far as the DHCP options page and then click 'next' and nothing happens. I have tried using bot...
Hi Raymond,Thanks for taking the time to reply in such detail.Unfortunately the Cisco 850 series does not support CBWFQ only WFQ (fair-queue).regards,Gary.
Hi Colin,Many thanks for the pointer, the article was a good read.However I have tried using policing to limit the bandwidth of 1 host pc as a test and I cant seem to get it working.I am using the 'crew' access list to match 192.168.100.3.Here is my ...
Thanks for the prompt reply. Does anyone have some configuration examples.Lets say there are 2 network hosts 192.168.1.1/24 and 192.168.1.1/24 and I want to allocate bandwidth fairly to each source address,
If I do that the user will not be able to access the internet.I want users to authenticate using telnet then be able to access Http.I don't want them opening a browser and be prompted with the authentication prompt. (I have a 3rd party application t...
