About robweb5mm

robweb5mm · 12-04-2015

Hi, I have a fairly simple network using the RV180 in NAT mode and using the latest Firmware. It is set up to email logs and emails are working fine. THE PROBLEM ... Although Logging Policies are set up correctly and I have log entries in the dif...

robweb5mm · 03-06-2015

I have a V01 (first model WAP) THE WAP4410N V01 WAP IS FAULTY.I hope this helps owners that own this first version ....》》》》》》》》》》》》》》》》》》》》》》》》》》》》Information from firmware update file .... Changes Since WAP4410N Hardware Version VID: V01WAP4410N now...

robweb5mm · 03-01-2015

Hi,I have a basic set up on the RV180, no VPNs etc. running 1.0.5.4 Firmware (latest) and are using a WAP4410n WAP plugged in to a LAN port on the RV180. I have a SG100D Gigabit Switch also connected to a RV180 port. My WiMax ISP supplies 12 Mb. Wh...

robweb5mm · 03-13-2015

Hi Eric,Thanks for your post. To keep it short, yes my knowledge of WiFi and Networking covers everything you mentioned. I have WiMax ISP 》RV180 》SG100D-8 SWITCH. Presently the WAP4410N is connected to the RV180. Wireless Devices are all .11N. All ...

robweb5mm · 03-12-2015

Hi Norrie,I asked Cisco if they would replace the V01 WAP4410N under their obligations under Aust. Consumer Law and they ran me round in circles. I was just saying if they still had a V02 Model in stock, that's all I expect as a replacement.I'm sure ...

robweb5mm · 03-10-2015

Hi Norrie,Just wanted to say ... all the best with your health problems, I hope all goes really well.I'm not trying to get anything more or less than what I payed for from Cisco, a WAP4410N V02 would be fine, but it doesn't look like that's going to ...

robweb5mm · 03-10-2015

Hi Kurt,Thanks for your post. I don't know about your network etc., but I often have many Wireless Devices accessing the Wired Network concurrently, and 12.5 MB isn't much to share!My primary purpose in posting was to simply make owners aware of the ...

robweb5mm · 03-09-2015

Re. Packet loss on WAP4410N, you may find this post of mine of interest. Cisco will not replace the faulty V01 WAPS.https://supportforums.cisco.com/discussion/12445636/wap4410n-v01-version-faulty-hw-slow-wan-dont-set-port-1gb-faultyAll the best .......

Member Since	‎03-01-2015 09:09 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	9

User Statistics

User Activity

RV180 ROUTER - Emails empty logs "No data available"

WAP4410N V01 Version - FAULTY HW - SLOW WAN - DON'T SET PORT to 1Gb - FAULTY.

RV180 Very Slow WAN/Internet Speed via WAP4410n (RV180 Port Speed Problem?)

Hi Eric,Thanks for your post.

Hi Norrie,I asked Cisco if

Hi Norrie,Just wanted to say

Hi Kurt,Thanks for your post.

Re. Packet loss on WAP4410N,