Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a DSL modem which is providing access to our MPLS service. When DSL modem is in bridge mode and connected to MX67 internet port with PPPoE enabled, it cannot get IP address. When we plug in a windows pc with pppoe enabled instead of MX, it ge...
HiWe are positioning MR30H in every hotel room and we want hotel guest to be able to connect only its room's AP. For now it is ok. However we also want hotel guests to be able to connect only the Chromecasts in their room, not the other Chromecasts. ...
Hi All
My customer wants to filter out devices which don't have Anyconnect or NAC Agent on them. If AC/Agent is installed, it should communicate to AD for domain logon. Otherwise device should not be able to access any resource.
To sum up, custome...
Hi All
Is there any way to prevent Mac spoofing with ISE CWA guest access by cookies etc? Concern: If someone learns an authenticated guest's MAC address, he can spoof this MAC and connect to the SSID without authentication before session timeout.
...
Can we check client's DNS and proxy settings with NAC agent or Anyconnect, and decide to allow the client if these settings are configured as compliant to corporate policy? If not, redirect to a page which says uncompliant DNS and proxy settings are ...
I solved it. ISP was not sending a proper DNS IP, that's why interface was not able to reach cloud and become online. I called Meraki support and requested them to override ISP's blank DNS setting to 8.8.8.8. It worked.
