Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Got a problem routing trafic to my L2L tunnel...Got an ASA5505 Sec+ with ip 10.45.10.1 on inside interface. Firmware 8.3(1)Got another Cisco router (From my ISP) with ip 10.45.10.254 - This one creates an L2L tunnel - To the 10.45.20.0/24 net.On t...
Hi,I have an ASA5505 with a L2L tunnel set up for our main office. L2L is working - no problems there.The problem is we have some Remote VPN Clients that connects to this ASA 5505.. And i need it to authenticate to our radius (Windows 2003) in main o...
Site1: 10.45.10.0/2410.45.10.1 is the ASA 5505 with internet access10.45.10.254 ME3400 Router (Only provides the L2L link - No internet)Site2: 10.45.20.0/2410.45.20.254 Cisco ME3400 RouterConfig from ASA5505 is attached... I know its not complete ye...
I have no idea why - But now its works...Had just entered your debug commands and tested AAA authentiaction again... Then it just replied "Authentication succesfull"..Maybe the Windows server was rebooted or something..I ended up using "inside" inter...
Ivan,I've tested aaa server with inside and outside interface. Management is set to inside interface. Same result - No responce.Anisha,I will test tomorrow and let you know.I've just set up a new ASA5505 at home and tested radius up against our main ...
When using this line:test aaa authentication partnerauth host 172.20.12.9 usernamen Administrator password xxxI get this:INFO: Attempting Authentication test to IP address (timeout: 12 seconds)ERROR: Authentication Server not responding: No errorFro...
Hi,Topology is correct If I authenticate a user with the LOCAL user database the user can access the ASA5505 network AND our main office. No problems there either.. Just the radius traffic i have problems with Best regardsCarsten
