Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have recently upgarded ASR9K to 6.5.3 64 bit eXR.More of us experienced this behaviour,longer commands or configuration lines entered,tried to use the previous command and edit it,the output get corrupted and failed to execute.It happens aft...
Dear Support,We upgrading IOSxr 64 bit 6.3.2 to 6.5.3.We can not upgrade as the rootfs: has not enough free space.As a workaround we removed some unecessary packages. (on an other router we had to remove necessary package as well)After the upgrade we...
Dear,I need help in the mentioned topic.We have some version 3.2 callmangers on different sites. These CCMs are h.323 gateways of one so this is a star totpology.We would like to migrate it to CUCM 7. So in the HUB a CUCM 7 was installed and I would ...
Hi All,Anyone using SERG pool synchronization?I have an issue, using 6.5.3 eXR with PPPoE.If one BNG goes down, other takes master role.BNG can not allocate IP address from pool on which it is the preferred slave. (but Master the current state)I coul...
Peyman,maximum 64k RP based PPPoE sessions per LC.maximum 128k RP based PPPoE sessions per BNGmaximum 192k RP based IPoE sessions per BNG !!!but plan below 80% of maximum in production.The 24 port LC is more than enough...Use RSP-880 or RSP-880-LTImr...
Dear All,We have issue when Core link recovery happens, whenSynchronization can be only via the Core link. BNG1 core link goes down, all groups get the Slave role. BNG2 loss Sync after timeout (~30sec) and all groups get Master role. B...
We tried SERG pool synchronisation feature for LC based PPPoE sessions but it does not work.Configured with RP based sessions and works fine. cXR 6.6.3 So this is an undocumented restriction or bug? What we found, the pools kind of syncronised betwee...
Dear Xthuijs,I have issue during the recovery of SRG group. There is outage when Master get back the session, after downlink recovery and grace period.When failover happens the outage is less than 1 sec.In case of recovery the outage is ~10 sec (if k...
