Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cisco 4507 swich,which i bootup and i see that after booting, the module of he supervisor engine light turn amber,while the other module ture green.I want to know the implication of that.Seconding,i notices that he does not accept ping,And s...
Can anybody help me out, I have want to config voice network with ip phone but i dont know where to start from.I have Cisco 3825 router with SRST licensing on it, using as a Voice gateway. And Cisco IP phone 7911 and a cisco switch 3750 POE, with Cis...
Can anybody help me out, I have want to config voice network with ip phone but i dont know where to start from.I have Cisco 3825 router with SRST licensing on it, using as a Voice gateway. And Cisco IP phone 7911 and a cisco switch 3750 POE, with Cis...
I have two switch and a router.I will name them switch A and B. SwitchA is connected to f0/0 of the router and switchB is connected to f0/1 of the same router.SwitchA is connened to a lan network which is 172.1.30.0/24 network.which the interface f0/...
I have a catalyst switch c3750 which i want to do vlan with it. I have vlan 1 and 2 on it.Vlan 1 ip addr 192.168.1.1/24vlan 2 ip addr 192.168.2.1/24And i tag each port to each vlan, port 1 and 2 precise.I then have host A ip addr to be 192.168.1.3 ga...
Thanks I did i connected the to the router on a truck port. I have vlan 2 encap on the router.When i should ip route. it should that we have two direct connected which is vlan1 N VALN2.NB. THE ISSUE IS THE ASA FIREWALL THAT IS BLOCKING THE PING ON ON...
The PC at 192.168.1.3 can ping the interface 192.168.2.1 and also the PC at 192.168.2.3 can ping the interface on 192.168.1.1.NO. From PC 192.168.1.3 if i ping PC 192.168.2.3 it does not ping or work.This is the ipconfig/all on both PCIP Address. . ....
Sorry for the error in the post.What am i mean was that the two host can ping the two vlan ip addr. But host A cannot ping host B. After ur post now i remove the firewall on both machine but the issue is the same. But the switch can ping both hosts.I...
The dynaminc interface is configure to be static.Then from the GUI goto CONTROLLER----INTERNAL DHCP SERVER----DHCP SCOPEBut the dynamic interface must be in the same ip subnet with the dhcp scope you created. You then need to tie it with the SSID u w...
