Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Further to this posthttps://community.meraki.com/t5/Wireless-LAN/DHCP-Issue-on-2-SSID-wireless-network-with-2-different-gateways/td-p/42710/jump-to/first-unread-messageSo on the switch I set the follwoingPort 1 to native VLAN 1 and only allows VLAN 1...
Hello,I have 2 SSID's one is for rny local LAN access - it's set to get DHCP from local server and uses Meraki firewall as the gateway. Howveer I also want to enable guest access via the guest SSID to a different gateway on a cheap & cheerful broadba...
Looking for some help please?I have a NAT rule that forward https on a specific IP to my exchange box for activesync. Works fineI want to prevent external access to oulook anywhere and the admin pages of exchange.Reseller advises me way to work is ad...
Just FYI I'm from a cloudtrax/openemesh backgroundAlso I have only 1 unit to trial so may not have the full picture.We have 20+ construction sites.Each site has 3 unique SSIDS - ClientXXX, StaffXXX, GuestXXXXXX is a unique identifier for the site.A 4...
I must be missing somethingThe MX is on a leased line and connected to internal switching. Corporate traffic lives here and the 2 DHCP servers for the LAN.The cheap broadband line is hooked to a cheap router and that's for guests. It handles it's own...
@jdb1- no I'm afraid that didn't workChanging VLAN ID didn't work either.However using the inbuilt meraki NAT worked.Wasn't really what I was wanting to do, and doesn't explain what was wrong with my ideas.Would really like to learn more, so if someo...
So I need a new switch. Bummer.So it's APs to new switch. APs have VLAN 1 for corporate, vlan 30 for guestDoe I then simply setup a couple of ports on the new switch with the corresponding VLAN and then connect the respective vlan port to either the ...
