I've got some switches at our location and with one of them we move a lot of the cables around frequently (don't ask). I plug the cable in and the light turns on to amber. It takes anywhere from 30sec to 1 minute for it to go green. In most switche...
I've got a router where I change the default gateway, but when I do a traceroute the connection still goes through the old gateway. Is there a command I'm missing that tells the router to use the new one?
Well, I got it squared away. Thanks to openeing a TAC case.I did make the .88 a neighbor. However, after pouring over the configs I had the serial connections shutdown!Thanks for all your help guys! I was able to get more done than what I original...
.9 and .88 are different routers (both 1750s). Let me give a little more detail:We have the .9 router and the .88 router. The .9 router routes all the traffic to our internet router. The .88 router is located in our ops center and we want all the ...
Nothing. I do a show ip route and most of it is still via 192.168.168.9 using eigrp.I didclear ip route *clear ip route 192.168.168.0The traffic is still going to the .9 router. I want all the traffic to go to the .88 one.
Here it is:WestVirgina1750#show ip route 192.168.168.88Routing entry for 192.168.168.0/24 Known via "eigrp 7000", distance 90, metric 20514560, type internal Redistributing via eigrp 7000 Last update from 192.168.168.9 on Serial0.30, 2w0d ago Rou...
