About daniel_cheung

daniel_cheung · 06-19-2008

Dear All,When a user dials a number that is routed through a CMC-enabled route pattern, a tone prompts the user for the client matter code. When the user enters a valid CMC. The CMC should be Hidden or Show on phone screen? Or any option in CCM we ca...

daniel_cheung · 04-19-2007

Hi, my CUE 2.3.4 integrate with CM4.X is work and fine. However when i try to integrate with CM 5.1b it got problem. It never integrate success. Would you please share you experience to me if you done it before thx!Regards!Daniel

daniel_cheung · 09-15-2005

Hi,I would like to ask about BR1300, Please give an idea. What is the max throughtput can reach when using a pair of BR1300 point to point (2km) with DISH antenna (like FTP up/download rate)?And what i need to tunning on BR1300 to gain this result?Ma...

daniel_cheung · 07-08-2008

Hi,I meet another problem during install the OS4.5 or 2003.1.1 to DL380 G5 Server too. The System Fail on the RAID Setup it pop-upThe configuration of the array controller failed!This can be caused by unexpected hardware or a hardware failure within ...

daniel_cheung · 06-19-2008

Noted! Thanks for information

daniel_cheung · 04-25-2007

Hi marschne,Thanks for your reply, finally the problem solved. In CCM 5.1 we need to use application (JTAPI) user and need add the CTI Enable Group to that jtapi user.RegardsDaniel Cheung

daniel_cheung · 03-28-2006

Thx all input!

Member Since	‎06-12-2005 10:14 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	7

User Statistics

User Activity

CMC Code Hidden or Not on phone screen [CCM5.13]?

CCM5.1(b) integrate with CUE 2.3.4

Asking about 1300 Typical Throughput (Mbps)

Re: HP DL380 G5 - Install Error

Re: CMC Code Hidden or Not on phone screen [CCM5.13]?

Re: CCM5.1(b) integrate with CUE 2.3.4

Re: Asking about 1300 Typical Throughput (Mbps)