Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So,
We are trying to setup Azure MFA with Cisco ASA version 9.1. The product works fine but when a password expires the AnyConnect client will prompt for the password change but then will get a message stating the password does not meet the policy ...
Been having an issue that has been happening more frequently. The scenario is: Cisco Phone connected to 2960-48PST-L switchWorkstation connected to the port on the phone What will happen is we will start getting mac flaps on the switch basically say...
We are working with a customer who has a pair of Pix515E firewalls. Their application sends a lot of email which the windows boxes that were sending the mail could not keep up with the load. The solution we implemented consisted of 4 Linux hosts to...
We have a customer that just reloacted and in the new location we setup an ASA 5505 but they are having trouble connecting to a VPN they need using the old Nortel Contivity VPN Client. At their old office they were also using a 5505 but it was on ol...
I have a customer that is a 2 office medical practice that has a VPN setup between the offices with an ASA5505 on each end. They have a T-1 at each office and they do RDP sessions from the remote office to the main office over the VPN. The troubl...
Ok....So I changed it to something like:!access-list outside_mpc extended deny ip any host 1.1.1.1!class-map outside-class match access-list outside_mpc!!policy-map outside-policy class outside-class police output 800000 1500!It is a T-1 and comes t...
Yup.... When you were throwing company names out I just looked you up on Linked-In and then it hit me who you were. Yeah the APs are really old and that may be part of getting everything in order as they need to be replaced anyway. We have 1252s in...
Ok...I will have to check into the WMM. Again, that is something I definitely remember Ascom telling me to have on.The DSCP values are intact. When you look at the phone logs you can see the 0x2e value up and down. I've had issues with that before...
Kayle,Thanks for the response....1. Code...running 6.0196.02. 8 SSIDs3. Older 1231s4. Yes to BothThe WMM and IE extensions would be something interesting to try as I know I have reviewed the configuration over and over with Ascom. If you read my...
1. SSIDs broadcasting....There are 8 SSIDs on the controller2. There is a lot of overlap....That is one of the main things we have been trying to mitigate. 3. Yes we have looked at the phone logs. Specifically what info are you looking for there?...
