Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Currently I'm (excitedly) exploring NeXt UI and already have a lot of ideas but at this moment I'm investing a lot of time to find detailed documentation.For example: I wanted to save the initial coordinates of a node and tried a lot of things...
Hi,
We are trying to set up a Wired Guest Access solution based on the infrastructure:
Converged access (sup8/3850) as Mobility Agent (MA)CT-5508 as Mobility Controller (MC)CT-5508 as Mobility Anchor (on DMZ)
There is a Switch Peer Group (SPG) on t...
Hi all, In one of our clients there is a wlan service for corporate devices with EAP-TLS and anchored since they require Internet access only. As stated on Cisco’s Enterprise Mobility 7.3 Design Guide, the wlan’s security parameters are configured ex...
Hi all, We have a funny behavior on one customer's guest access. The solution has web authentication (L3), the login page is stored locally to the anchor controllers (Local Web Authentication) and Cisco ISE v1.2.0.899, patch 6, hosts the sponsor port...
Hi, We are implementing Cisco ISE 1.2.0.899 and have an alarm reporting expired license. This alarm refers to the Advanced License demo and is therefore a false positive. This issue is that we cannot remove the demo icense and stop the root cause of ...
Hi Aleksei,Thanks for the answer. All good here, thanks for asking Hope all well on your side also.I read the doc and am using the API but not all the methods are documented there, being the "setModel" on the nx.graphic.Topology.Node one example of ...
For documentation proposes, in case someone reaches here in the future, the problem is solved.
The name of the tunnel (bold underline below)
service-template GUEST-TUNNEL
tunnel type capwap name TUNNEL-CAPWAP
has to match the guest-lan name (bold u...
If I can answer with my case, the SSL breaks just after the first client hello, the server certificate is not even changed. I'm wondering if it's not because ISE don't accept any of the ciphers proposed by Prime (see attached).
Hi RG, I'm having the same problem. A TCPDump on ISE shows that ISE is replying with a TLSv1 "handshake failure" to Prime's SSLv2 "client hello". If possible, keep this post updated with TACs reply. My environment:Prime: 2.1.0.0.87ISE: 1.4.0.253 patc...
