Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear, I Have UC320 with 4 SPA303. From 2 Weeks all received calls via PSTN, after 10 or more second, al SPA-303 restart. If i received calls via SIP/VOIP it all ok. i tried:factory resetanother PSTN Line (from number 1 to number 4)another PSTN Line i...
I have a problems with one SA520W.The LAN port don't work correctly. If i connect PC directly via ethernet cable (i try 2 different cable and 2 different PC) the DHCP don't assign an IP. If i reset to factory default and manual insert IP (192.168.75....
I have problems with caller id. it is not visualized in my system (UC320W 2.1.4(3) , 3 x SPA303 , SPA8800)i try this:reset and reconfigureupdate 2.2.2 with factory default and reconfigureonly fxo0 (0 number of line) visualized in spa303line in UC320W...
I have a system with UC320W and SPA8800 it is possible to use specific FXO port to specific number?example0XXX XXXX use SIP VOIP Provider, FXO1 , FXO2 , etc..etc.. sequentially03XXX XXX use only FXO8 (latest of SPA8800) --- this is the mobile phone p...
Hi Dave,WIP310 are register in SPA9000 (attach the screenshot) correctly.Next week i send you a syslog of a call and i test connect WIP310 in the same LAN of SPA9000.thanksThomas
hi,i'm using 3 linksys RVS4000 with firmware versione 1.1.14 in VPN all threein zone 1 i have SPA9000+400 and 4 SPA941in zone 2 i have 2 SPA941 and WIP310in zone 3 i have 2 SPA941 and 1 SPA3102all SPA941 and SPA3102 work correctly (the system are ins...
