About awcevans01

awcevans01 · 08-30-2012

Is someone able to let me know which is the correct license below for a Nexus switch bundle N5K-C5596UPM-B-S96? I get different results from CCW and the Dynamic configurator tool (please kill off one or the other - different results from two tools is...

awcevans01 · 08-02-2010

Here's the issue:I'm looking at a solution to connect a bunch of buildings using a mesh solution. The distances aren't that great (under 100m total), but we need to deliver a Ethernet segment to every building (8 remote buildings). The thinking was t...

awcevans01 · 07-10-2010

Quick question. I have a customer that wants to deploy ethernet into 9 buildings. The issue is we can't physically cable them together. We have looked at a Cisco 1300 bridge deployment with 1200 series AP's in each remote building, but there's is no...

awcevans01 · 11-24-2009

I'm in the process of configuring Unity Express 7.0.3 to connect to CallManager 4.2, i've noticed the GUI for the Unity wizard is referring to CCME. How do I convert the Unity Express install to reference CCM? The Unity Express module had gone throug...

awcevans01 · 05-29-2011

Quick answer. You must have the 1200 series AP with a/b/g radio's to run the mesh load even if you are not using one of the radio's.

awcevans01 · 08-02-2010

ThanksMesh firmware is fine, the 1240's with a single wireless radio is ok? The only reference guides I could find mentioned you needed dual radio for indoor mesh, i'm hoping that as i'm not using both radio's it won't care. There used to be an indoo...

awcevans01 · 11-24-2009

Ahh gotta load a CCM license file.

Member Since	‎10-17-2006 03:28 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	12

User Statistics

User Activity

Nexus DCNM license issue

Indoor Mesh providing multiple bridges

Cisco Mesh to deliver Ethernet

Unity Express for CCM configuration

Re: Cisco Mesh to deliver Ethernet

Re: Indoor Mesh providing multiple bridges

Re: Unity Express for CCM configuration