Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Community,
I would like some clarity regarding an ACL i have created on a L3 switch.
For example i have a Mobile network which is subnet 10.3.12.0/24
This network only needs to access mailserver and Internet, rest off traffic needs to be blo...
Dear community,
We are taking over the infrastructure off a client with an existing Cisco infrastructure.
1 Core Switch 3560
4 Access switches 2960
When i took a look at the config off all switches, i noticed that all switches (core and access) wh...
Dear Community,
All of a sudden 2 ports on a Cisco WS-C2960X-24PD-l are dead. These ports where configured for 2 VOIP telephones from the brand Mitel
15.2(2)E3 - C2960X-UNIVERSALK9-M
Port config:
description DATA-VOIP switchport access vlan 100 s...
Hi,
Problem:
No DHCP offers over a wireless trunk for a newly created Vlan (vlan 160 in this example).
Infrastructure:
Access Switch: WS-C2960+24PC-SDistribution Switch: WS-C2960S-24TD-L
Situation:I have created a DHCP and a SVI on the distributio...
Hi, i have problem configuring DMZ to access outside.I'm not able to ping from DMZ network to DMZ interface (gateway) neither am i able to contact the internet with DMZ hostsI'm able to ping from LAN to LAN gateway (inspect ICMP service policy) inter...
Hi Flavio,But what it's the reason that i can't ping from 10.3.3.0 to 10.3.12.0? I would presume that the ACL does it's work?The SVI sees that the return traffic coming from 10.3.3.0 is not permitted so it blocks.The reason why i'm asking is because ...
Good morning Mark,
Np!
That's abit difficult because this is production.I have allready deleted and recreated the vlan multiple times and reloaded both switches.
We have allready had multiple problems with the wirelss bridge and the last change we di...
Hi Mark,
I also noticed i don't receive any BPDU packet from the distribution switch to the access switch
but it does transmit from the distribution switch
401703: .May 27 15:42:17.621: RSTP(450): sending BPDU out Gi1/0/24401704: .May 27 15:42:17...
Good evening Mark,
I've made the distribution switch root for vlan 160 with priority 4096 = 4256, but when spanning-tree recalculates the access switch stays root bridge, so is the distribution switch.
I'm not able to remove the spanning-tree syste...
