Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hallo Community i need your help,i cannot send emails to outside, i have an access rule on interface inside permit source: inside destination: any servic: tcp/smtpand when i make paket tracer it shows me that the packet is dropped but i cant see th...
Hallo Community, i dont know if iam right hier but i have a problem with ASA 5510 version 8.2(1),i have a mac os x 10.6.8 dns server when the asa is online and i want to use the internet my internet is very slaw it neede about 1.5 min to open yahoo.c...
hallo Community,i need your help i have a Catalyst 2960S since 2 days iam a new user, i like to configure the switch!my first problem is: i have 2 vlan vlan1/24 and vlan200/24 i'd like to cofig port1 to be tagged on the 2 vlans i know from hp port mu...
Hallo Community,iam new in asa world so i need your help very much!!i have to config a new vlan(its name vlan220, ip: x.x.220.0/24), vlan220 must have internet and should communicate with another vlan(its name vlan200, ip: x.x.200/24).in ASDM device ...
Hallo People,iam new using the asa.I need ur help in editting the name of a vpn connection profile and its policy, i have created the profile throught ipsec VPN wizard, the profile got automatically the name: DefaultRAGroup and also its grouppolicy g...
i would like to config the cisco to work like the hp switches because by and by i want to change to cisco.so i still have the question:how i tagged the 2960 in vlan1 aund vlan2andhow i untagged the pc in vlan1 and the mac in vlan2 ps i have made the ...
Hey thank you for the tipps,on port 1 the trunk works, but on port 2 i am still have no connection to the dhcp server.ASA 5510 is doing the routingbest regards Tony
in vlan200 (10.10.200.0/24) i have a dhcp serverip adress 10.10.200.1and thats my problem how can i config port 2 in vlan200 so that my lap becomes an ip= 10.10.200.3the cisco switch(port1) is connected to a hp switch(port3) so i think i have to conf...
thank you for the answer,but i still have the problem in vlan200!!vlan1 is my default vlanin vlan200 there is a dhcp server, i connect the switch to the LAN through port 1, how can i configure port one so that the switch can communicate on the 2 vlan...
