Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloQuick question. I have manually set the 5GHZ channel width on our system to 40MHz. I have noticed that the channels being selected are overlapping. I would assume that if I defined 40MHz channel it would pick from one of the 14 non overlapping...
Hi guys,Do you use Auto or Manual under 5 GHZ radio settings? We have things set at 20 and 40 for various networks, but I am interested in A.I. ing as much of our network as possible. Especially as things improve with A.I. features on the Meraki si...
HelloWe moved our MR 46 access points to 30.6 to solve a major issue where the rates were not being broadcast in probe response packets. Restarting the APs would fix them for a while, but suddenly they would stop taking Chromebook clients again and ...
HelloI am having a very frustrating problem. Everyone once in a while - maybe daily web browsing will stop working on my laptop and I will be unable to ping my default gateway(timeout). At the same time if I am on a zoom or in a remote desktop sess...
Here is my reply from Meraki. No admittance...Thanks for reaching out on this one.I can see that while 8 devices are negotiated at 100Mbps, this looked to have occured some time ago:As the link negotiation occurs on the initial connection the device...
I am going to move down to 20MHZ overnight here and see if that makes a difference. We have an AP per classroom. I am nervous about the bandwidth loss but hopefully should be ok.Any opinions?
