Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have 59 AP's I'm looking to produce a report for the past 4 months of usage as I may need to remove the least used AP to an area that now requires coverage.Can anyone advise how I would get the data?Thanks.
We've had this back from Meraki!Following investigations, we have narrowed down the issue we are seeing with the "Ethernet uplink speed degraded" alerts on the affected MR APs, which causes the link speed being degraded from original 1000Mbps to 100M...
We took an AP reporting the "ethernet_negotiation_failure" and plugged it directly in to the switch with a known good 1Gb capable patch cable. It went to 1000Mbps connection and cleared the error. We tested the same with another known patch cable and...
Update.The AP is now running at 1000!I wonder if it did immediately start running at 1000, but it took the portal a while to catch up?We are now going to try another patch lead to the same AP / Switch and if that works, use those two "known good" pat...
