I have an unusual situation, at least I am unable to see it represented here. I am on a Cisco U560 and a PRI. In Outgoing Call Handeling in the Dial Plan the settings are as follows: I am unable to dial an international number with 12 digits. Example 011 44 344 800 XXXX. It always responds with " this number can not be completed as dialed". They hit the telco as "international" Plan:ISDN, Channel ID i = 0xA98383 Exclusive, Channel 3 Progress Ind i = 0x8183 - Origination address is non-ISDN Calling Party Number i = 0x2180, '815623XXXX' Plan:ISDN, Type:National Called Party Number i = 0x91, '01144344800XXXX' Plan:ISDN, Type:International I can dial international numbers of less than 12 digits or greater then 12 digits with no issue. They hit the telco as "unknown". Plan:Unknown, Type:Unknown Channel ID i = 0xA98386 Exclusive, Channel 6 Progress Ind i = 0x8183 - Origination address is non-ISDN Calling Party Number i = 0x2180, '815623XXXX' Plan:ISDN, Type:National Called Party Number i = 0x80, '0114822594XXXX' Plan:Unknown, Type:Unknown I know there is a simple fix, I just can't seem to get my head around it.
... View more
I also am not able to access the Web Interface, which is a real problem as that is the only way to turn features on and off within this device. After doing several days of research and using every conceivable combination of resets, it is obvious there is a defect in this device. How can I get Cisco to replace this AP? Or is there some magical means of getting the flash rom upgraded without the web interface.
... View more