Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everybody,I have a problem with an ATA 186 running the MGCP image - I can't get a dial-tone, access the IVR or get the function button to light. However, I can access the web management page without any problems so the device is alive in some form...
Hi all!I'm having some real issues getting Passive FTP to work through my CSS - the setup is a fairly normal one: 2 VLANS (ext and internal); a content group with the application ftp setting and a group specifying the service to control NATing. Activ...
Hi there!I have a 2621XM with a NM-HD-2VE and 2MFT-E1 in Slot 0. If I understand correctly, the 3 fixed DSPs will support 48 calls, whilst the 2 E1s could support 60 simultaneous active channels in theory. Can somebody please explain to me this discr...
Hi!I'm having a problem with OSPF and would appreciate some help!We are trying to implement OSPF onto our internal network - essentially we have a 6509 in the core, and for the purposes of this post, a pair of 2600s - each on their own vlan interface...
Hi! Version is 07.50.1.03.Here's my config:!*************************** GLOBAL *************************** no restrict web-mgmt console authentication secondary local virtual authentication secondary local username admin des-password zc1h3hbfc...
Thanks very much Rick,That pretty much confirms what I had been thinking although I had convinced myself that multicasting was to blame even though 'sh ip mroute' never indicated any 224.0.0.5 traffic.I'll enable OSPF on the 6509 and see what happens...
Hi Guys,Thanks for the prompt response - I guess my first post was a little light on info. First of all - here are some config snippets:**Router A - 2600, connects to 6509 Switch Vlan 100**interface Ethernet0 ip address 172.16.102.245 255.255.252.0 i...
