Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please try adding the network-clock participate and select command as appropriate for your setup:Example - NOTE: you will need to add E1 instead of T1network-clock-participate slot 1 network-clock-select 1 T1 1/0network-clock-select 2 T1 1/1Thanks, M...
Srini, this is exactly what you need:http://www.cisco.com/en/US/products/hw/modules/ps2740/products_configuration_example09186a00800e0dcd.shtmlThanks, Mak
Since this is CAS signaling, the call out is going to be as a modem call-out. Will need to see the relevant modem configuration and associated line configuration.The dialer pool will associate with the physical ports using "dialer pool member" comman...
Is the incoming call an exec call or a ppp call? Exec typically is when you want to dial into a router for OOB management.I am assuming it's ppp, in that case please add "ppp authentication pap" under "interface Group-Async1"A couple of good docs on ...
