Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Went down a bit of a warranty rabbit hole the other day as I read a post about the Meraki C81xx Routers warranty being 'Cisco' not 'Meraki'. I've reviewed in more detail and think I've pulled together a summary below. I'd appreciate anyone cor...
Similar to my other post, has anyone used VRF's on MX yet? If so what use cases? I'm interested to know if VRF's on MX will allow you to have alternative routing tables, including Default Route, so that for example, Guest traffic egresses locally at ...
Just wondering if anyone had done any testing with HTTPS inspection on MX? Interested in knowing how it impacted performance as well as any other gotcha's.https://documentation.meraki.com/SASE_and_SD-WAN/MX/Operate_and_Maintain/Content_Filtering_and_...
Hi Everyone, I was wondering if anyone knows if an MX will allow an AnyConnect user to route over a site to site VPN to a non-Meraki peer? Example user VPN's into an MX using AnyConnect, there is a 3rd party service linked via S2S VPN from that MX. W...
Hi All, just wondering how customers are accounting for headless devices (printers, sensors & IoT devices as examples) within Secure Connect? Do you see any issues with their traffic flows and do you need to set up any bypasses around auth etc?
No, there is most definitely a difference in the warranty RMA terms of the two (-M vs -E). Both datasheets have very different wording about the RMA time frames & more specifically MX vs C8xxx routers Lifetime vs 2-yr warranty. While I get that TAC t...
Thanks, wondering if the C8xxx have more processor headroom for things like this? Seems a bad decision to add as a feature if it has such an impact on performance (i'm aware of performance hits on other vendor equipment but at least the quote the exp...
See this topic, might be a 17.2.1.1 issue. OP on this fixed their issue with upgrade to 17.2.2https://community.meraki.com/t5/Switching/Problems-with-printer-after-upgrade-MS-Switches-225-to-latest/m-p/276928#M21109
I have to wonder if they're taking the easy route on the ticket (no offense to Meraki Support) but if its a standards based NIC then I dont see why it wouldnt work. Can you post the port config from the Aruba switch for the port it was connected to? ...
Ok adding to this, seems like when someone is connected to the AnyConnect the customer loses connection to the far end of the S2S VPN locally. AnyConnect user doesn't seem to lose connectivity to the S2S VPN at all just local LAN (Wi-Fi) users. Can s...
